The QSGRenderNode class represents a set of custom rendering commands targeting the graphics API that is in use by the scenegraph. 更多...
| 头： | #include <QSGRenderNode> |
| qmake: | QT += quick |
| Since: | Qt 5.8 |
| 继承： | QSGNode |
| class | RenderState |
| enum | RenderingFlag { BoundedRectRendering, DepthAwareRendering, OpaqueRendering } |
| flags | RenderingFlags |
| enum | StateFlag { DepthState, StencilState, ScissorState, ColorState, ..., RenderTargetState } |
| flags | StateFlags |
| QSGRenderNode () | |
| ~QSGRenderNode () | |
| virtual StateFlags | changedStates () const |
| const QSGClipNode * | clipList () const |
| virtual RenderingFlags | flags () const |
| qreal | inheritedOpacity () const |
| const QMatrix4x4 * | matrix () const |
| virtual QRectF | rect () const |
| virtual void | releaseResources () |
| virtual void | render (const RenderState * state ) = 0 |
The QSGRenderNode class represents a set of custom rendering commands targeting the graphics API that is in use by the scenegraph.
Possible values for the bitmask returned from flags ().
| 常量 | 值 | 描述 |
|---|---|---|
QSGRenderNode::BoundedRectRendering
|
0x01
|
Indicates that the implementation of render () does not render outside the area reported from rect () in item coordinates. Such node implementations can lead to more efficient rendering, depending on the scenegraph backend. For example, the software backend can continue to use the more optimal partial update path when all render nodes in the scene have this flag set. |
QSGRenderNode::DepthAwareRendering
|
0x02
|
Indicates that the implementations of render () conforms to scenegraph expectations by only generating a Z value of 0 in scene coordinates which is then transformed by the matrices retrieved from RenderState::projectionMatrix () 和 matrix (), as described in the notes for render (). Such node implementations can lead to more efficient rendering, depending on the scenegraph backend. For example, the batching OpenGL renderer can continue to use a more optimal path when all render nodes in the scene have this flag set. |
QSGRenderNode::OpaqueRendering
|
0x04
|
Indicates that the implementation of render () writes out opaque pixels for the entire area reported from rect (). By default the renderers must assume that render () can also output semi or fully transparent pixels. Setting this flag can improve performance in some cases. |
The RenderingFlags type is a typedef for QFlags <RenderingFlag>. It stores an OR combination of RenderingFlag values.
The StateFlags type is a typedef for QFlags <StateFlag>. It stores an OR combination of StateFlag values.
Default constructs an instance of QSGRenderNode.
Destructs the render node. Derived classes are expected to perform cleanup similar to releaseResources () in here.
When a low-level graphics API is in use, the scenegraph will make sure there is a CPU-side wait for the GPU to complete all work submitted to the scenegraph's graphics command queue before the scenegraph's nodes are deleted. Therefore there is no need to issue additional waits here, unless the render () implementation is using additional command queues.
另请参阅 releaseResources ().
[虚拟]
StateFlags
QSGRenderNode::
changedStates
() const
This function should return a mask where each bit represents graphics states changed by the render () 函数：
The function is called by the renderer so it can reset the states after rendering this node. This makes the implementation of render () simpler since it does not have to query and restore these states.
The default implementation returns 0, meaning no relevant state was changed in render ().
With APIs other than OpenGL the relevant states are only those that are set via the command list (for example, OMSetRenderTargets, RSSetViewports, RSSetScissorRects, OMSetBlendFactor, OMSetStencilRef in case of D3D12), and only when such commands were added to the scenegraph's command list queried via the QSGRendererInterface::CommandList resource enum. States set in pipeline state objects do not need to be reported here. Similarly, draw call related settings (root signature, descriptor heaps, etc.) are always set again by the scenegraph so render () can freely change them.
The software backend exposes its QPainter and saves and restores before and after invoking render (). Therefore reporting any changed states from here is not necessary.
注意： This function may be called before render ().
Returns the current clip list.
[虚拟]
RenderingFlags
QSGRenderNode::
flags
() const
Returns flags describing the behavior of this render node.
The default implementation returns 0.
另请参阅 RenderingFlag and rect ().
Returns the current effective opacity.
Returns pointer to the current model-view matrix.
[虚拟]
QRectF
QSGRenderNode::
rect
() const
Returns the bounding rectangle in item coordinates for the area render () touches. The value is only in use when flags () includes BoundedRectRendering , ignored otherwise.
Reporting the rectangle in combination with
BoundedRectRendering
is particularly important with the
software
backend because otherwise having a rendernode in the scene would trigger fullscreen updates, skipping all partial update optimizations.
For rendernodes covering the entire area of a corresponding QQuickItem the return value will be (0, 0, item->width(), item->height()).
另请参阅 flags ().
[虚拟]
void
QSGRenderNode::
releaseResources
()
This function is called when all custom graphics resources allocated by this node have to be freed immediately. In case the node does not directly allocate graphics resources (buffers, textures, render targets, fences, etc.) through the graphics API that is in use, there is nothing to do here.
Failing to release all custom resources can lead to incorrect behavior in graphics device loss scenarios on some systems since subsequent reinitialization of the graphics system may fail.
注意： Some scenegraph backends may choose not to call this function. Therefore it is expected that QSGRenderNode implementations perform cleanup both in their destructor and in releaseResources().
Unlike with the destructor, it is expected that render () can reinitialize all resources it needs when called after a call to releaseResources().
With OpenGL, the scenegraph's OpenGL context will be current both when calling the destructor and this function.
[pure virtual]
void
QSGRenderNode::
render
(const
RenderState
*
state
)
This function is called by the renderer and should paint this node with directly invoking commands in the graphics API (OpenGL, Direct3D, etc.) currently in use.
The effective opacity can be retrieved with inheritedOpacity ().
The projection matrix is available through state , while the model-view matrix can be fetched with matrix (). The combined matrix is then the projection matrix times the model-view matrix. The correct stacking of the items in the scene is ensured by the projection matrix.
When using the provided matrices, the coordinate system for vertex data follows the usual QQuickItem conventions: top-left is (0, 0), bottom-right is the corresponding QQuickItem 's width() and height() minus one. For example, assuming a two float (x-y) per vertex coordinate layout, a triangle covering half of the item can be specified as (width - 1, height - 1), (0, 0), (0, height - 1) using counter-clockwise direction.
注意： QSGRenderNode is provided as a means to implement custom 2D or 2.5D Qt Quick items. It is not intended for integrating true 3D content into the Qt Quick scene. That use case is better supported by QQuickFramebufferObject , QQuickWindow::beforeRendering (), or the equivalents of those for APIs other than OpenGL.
Clip information is calculated before the function is called, it is however not enabled. Implementations wishing to take clipping into account can set up scissoring or stencil based on the information in state . Some scenegraph backends, software in particular, use no scissor or stencil. There the clip region is provided as an ordinary QRegion .
For OpenGL the following states are set on the render thread's context before this function is called:
States that are not listed above, but are included in StateFlags , can have arbitrary values.
changedStates () should return which states this function changes. If a state is not covered by StateFlags , the state should be set to the default value according to the OpenGL specification. For other APIs, see the documentation for changedStates () 了解更多信息。
注意： Depth writes are disabled when this function is called (for example, glDepthMask(false) in case of OpenGL). Enabling depth writes can lead to unexpected results, depending on the scenegraph backend in use, so nodes should avoid this.
For APIs other than OpenGL, it will likely be necessary to query certain API-specific resources (for example, the graphics device or the command list/buffer to add the commands to). This is done via QSGRendererInterface .
另请参阅 QSGRendererInterface and QQuickWindow::rendererInterface ().