The QKnxAddress class represents a 16-bit KNX address value. 更多...
| 头： | #include <QKnxAddress> |
| qmake: | QT += knx |
| struct | Group |
| struct | Individual |
| enum class | Notation { TwoLevel, ThreeLevel } |
| enum class | Type { Group, Individual } |
| QKnxAddress (QKnxAddress::Type type , const QKnxByteArray & address ) | |
| QKnxAddress (QKnxAddress::Type type , const QString & address ) | |
| QKnxAddress (QKnxAddress::Type type , quint16 address ) | |
| QKnxAddress () | |
| QKnxByteArray | bytes () const |
| bool | isBroadcast () const |
| bool | isCouplerOrRouter () const |
| bool | isUnregistered () const |
| bool | isValid () const |
| quint8 | mainOrAreaSection () const |
| quint8 | middleOrLineSection () const |
| quint8 | size () const |
| quint16 | subOrDeviceSection (QKnxAddress::Notation notation = Notation::ThreeLevel) const |
| QString | toString (QKnxAddress::Notation notation = Notation::ThreeLevel) const |
| QKnxAddress::Type | type () const |
| bool | operator!= (const QKnxAddress & other ) const |
| bool | operator== (const QKnxAddress & other ) const |
| QKnxAddress | createGroup (quint8 mainGroup , quint16 subGroup ) |
| QKnxAddress | createGroup (quint8 mainGroup , quint16 middleGroup , quint8 subGroup ) |
| QKnxAddress | createIndividual (quint8 area , quint16 line , quint8 sequentialNumber ) |
| QDebug | operator<< (QDebug debug , const QKnxAddress & address ) |
KNX is a fully distributed network, which accommodates up to 65,536 devices in a 16-bit individual address space. Concrete address 类型 are group address and individual address .
This enum describes the supported human-readable representation of KNX addresses.
| 常量 | 值 | 描述 |
|---|---|---|
QKnxAddress::Notation::TwoLevel
|
0x00
|
The visual representation will be main group and sub group, separated by a forward slash. |
QKnxAddress::Notation::ThreeLevel
|
0x01
|
The visual representation for group addresses will be main, middle, and sub group separated by a forward slash, while individual addresses will be formatted as area, line, and sequential number, separated by a dot. |
注意： Only group addresses support 2-level notation.
This enum describes the supported KNX address types.
| 常量 | 值 | 描述 |
|---|---|---|
QKnxAddress::Type::Group
|
0x01
|
A group address is a 2-byte value that does not need to be unique. A device may have more than one group address. |
QKnxAddress::Type::Individual
|
0x00
|
An individual address is a 2-byte value that needs to be unique within a KNX installation. |
Creates a KNX address from the first two bytes of the address byte array. The type of the address is specified by type .
注意： The byte array must contain at least two elements.
Creates a KNX address from the string address representation. The type of the address is specified by type . Depending on the parsed sections, the formatting is set to 2 or 3-level notation.
A KNX address can be in one of the following formats:
注意：
For group address 2-level notation, the value of the main group should be in the range
0
to
31
and the sub group value in the range
0
to
2047
.
注意：
For group address 3-level notation, the value of the main group should be in the range
0
to
31
, that of the middle group in the range
0
to
7
, and that of the sub group in the range
0
to
255
.
注意：
For individual address 3-level notation, the value of area should be in the range
0
to
15
, the value of line in the range
0
to
15
, and the sequential number value in the range
0
to
255
.
Creates a KNX address from a 16-bit
address
value. The type of the address is specified by
type
. The value of
address
should be in the range
0
to
65535
. The formatting is set to 3-level notation.
Constructs an new, invalid KNX address object. The formatting is set to 3-level notation.
Returns a KNX address as a range of bytes if the address is valid; otherwise the return value is empty. Only the first two bytes of the return value are part of the address.
[static]
QKnxAddress
QKnxAddress::
createGroup
(
quint8
mainGroup
,
quint16
subGroup
)
Creates a KNX
group address
from the 2-level notation. The value of
mainGroup
should be in the range
0
to
31
and that of
subGroup
in the range
0
to
2047
.
[static]
QKnxAddress
QKnxAddress::
createGroup
(
quint8
mainGroup
,
quint16
middleGroup
,
quint8
subGroup
)
Creates a KNX
group address
from the 3-level notation. The value of
mainGroup
should be in the range
0
to
31
, that of
middleGroup
in the range
0
to
7
, and that of
subGroup
in the range
0
to
255
.
[static]
QKnxAddress
QKnxAddress::
createIndividual
(
quint8
area
,
quint16
line
,
quint8
sequentialNumber
)
Creates a KNX
individual address
from the 3-level notation. The value of
area
should be in the range
0
to
15
, that of
line
in the range
0
to
15
, and that of
sequentialNumber
in the range
0
to
255
.
返回
true
if this is a valid
group address
object and the address is set to
0x0000
;
false
否则。
返回
true
if this is a valid
individual address
object and the device's sequential number is set to
0x00
;
false
否则。
Area and line couplers, as well as KNXnet/IP routers (routing) are given the sequential number
0x00
.
For example, the individual address
1.5.0
identifies a KNXnet/IP router acting as a line coupler that couples the fifth line with the main line in the first area.
返回
true
if this is a valid
individual address
object and the device's sequential number is set to
0xff
;
false
否则。
返回
true
if this is a valid KNX address object;
false
否则。
Depending on the type of the address, this function returns either the area component or the main component of the address.
该函数在 Qt 5.12 引入。
Depending on the type of the address, this function returns either the line component or the middle component of the address.
该函数在 Qt 5.12 引入。
Returns the size of a KNX address.
Depending on the type and the given notation , this function returns either the device component or the sub component of the address.
注意： Individual addresses support only 3-level notation, whereas group addresses support 2-level or 3-level notation.
该函数在 Qt 5.12 引入。
Returns the KNX address as a string formatted using the internal stored notation . An address of the type Group is formatted using a forward slash as a separator, while an address of the type Individual is formatted using a dot as separator.
注意： Individual addresses support only 3-level notation, whereas group addresses support 2-level or 3-level notation. If the address is invalid or 2-level notation is requested for individual addresses, an empty string is returned.
Returns the address type.
返回
true
if this object is not equal with
other
；否则返回
false
.
返回
true
if this object is equal with
other
；否则返回
false
.
Writes the KNX address address 到 debug stream.