QAbstractOAuth2 Class

The QAbstractOAuth2 class is the base of all implementations of OAuth 2 authentication methods. 更多...

頭：	#include <QAbstractOAuth2>
qmake:	QT += networkauth
Since:	Qt 5.8
繼承：	QAbstractOAuth
繼承者：	QOAuth2AuthorizationCodeFlow

該類在 Qt 5.8 引入。

所有成員列錶，包括繼承成員

特性

clientIdentifierSharedKey : QString
expiration : const QDateTime
scope : QString

state : QString
userAgent : QString

公共函數

	QAbstractOAuth2 (QNetworkAccessManager * manager , QObject * parent = nullptr)
	QAbstractOAuth2 (QObject * parent = nullptr)
virtual	~QAbstractOAuth2 ()
QString	clientIdentifierSharedKey () const
virtual QUrl	createAuthenticatedUrl (const QUrl & url , const QVariantMap & 參數 = QVariantMap())
QDateTime	expirationAt () const
virtual QNetworkReply *	post (const QUrl & url , const QByteArray & data )
virtual QNetworkReply *	post (const QUrl & url , QHttpMultiPart * multiPart )
virtual QNetworkReply *	put (const QUrl & url , const QByteArray & data )
virtual QNetworkReply *	put (const QUrl & url , QHttpMultiPart * multiPart )
QString	refreshToken () const
QString	responseType () const
QString	scope () const
void	setClientIdentifierSharedKey (const QString & clientIdentifierSharedKey )
void	setRefreshToken (const QString & refreshToken )
void	setScope (const QString & scope )
void	setState (const QString & state )
void	setUserAgent (const QString & userAgent )
QString	state () const
QString	userAgent () const

重實現公共函數

virtual QNetworkReply *	deleteResource (const QUrl & url , const QVariantMap & 參數 = QVariantMap()) override
virtual QNetworkReply *	get (const QUrl & url , const QVariantMap & 參數 = QVariantMap()) override
virtual QNetworkReply *	head (const QUrl & url , const QVariantMap & 參數 = QVariantMap()) override
virtual QNetworkReply *	post (const QUrl & url , const QVariantMap & 參數 = QVariantMap()) override
virtual QNetworkReply *	put (const QUrl & url , const QVariantMap & 參數 = QVariantMap()) override

信號

void	authorizationCallbackReceived (const QVariantMap & data )
void	clientIdentifierSharedKeyChanged (const QString & clientIdentifierSharedKey )
void	error (const QString & error , const QString & errorDescription , const QUrl & uri )
void	expirationAtChanged (const QDateTime & expiration )
void	refreshTokenChanged (const QString & refreshToken )
void	scopeChanged (const QString & scope )
void	stateChanged (const QString & state )
void	userAgentChanged (const QString & userAgent )

詳細描述

The class defines the basic interface of the OAuth 2 authentication classes. By inheriting this class, you can create custom authentication methods using the OAuth 2 standard for different web services.

A description of how OAuth 2 works can be found in: The OAuth 2.0 Authorization Framework

特性文檔編製

clientIdentifierSharedKey : QString

This property holds the client shared key used as a password if the server requires authentication to request the token.

訪問函數：

QString	clientIdentifierSharedKey () const
void	setClientIdentifierSharedKey (const QString & clientIdentifierSharedKey )

通知程序信號：

void	clientIdentifierSharedKeyChanged (const QString & clientIdentifierSharedKey )

expiration : const QDateTime

This property holds the expiration time of the current access token.

訪問函數：

QDateTime

expirationAt () const

通知程序信號：

void	expirationAtChanged (const QDateTime & expiration )

scope : QString

This property holds the desired scope which defines the permissions requested by the client.

訪問函數：

QString	scope () const
void	setScope (const QString & scope )

通知程序信號：

void	scopeChanged (const QString & scope )

state : QString

This property holds the string sent to the server during authentication. The state is used to identify and validate the request when the callback is received.

訪問函數：

QString	state () const
void	setState (const QString & state )

通知程序信號：

void	stateChanged (const QString & state )

userAgent : QString

This property holds the User-Agent header used to create the network requests.

The default value is "QtOAuth/1.0 (+https://www.qt.io)".

訪問函數：

QString	userAgent () const
void	setUserAgent (const QString & userAgent )

通知程序信號：

void	userAgentChanged (const QString & userAgent )

成員函數文檔編製

QAbstractOAuth2:: QAbstractOAuth2 ( QNetworkAccessManager * manager , QObject * parent = nullptr)

Constructs a QAbstractOAuth2 object using parent as parent and sets manager as the network access manager.

QAbstractOAuth2:: QAbstractOAuth2 ( QObject * parent = nullptr)

Constructs a QAbstractOAuth2 object using parent 作為父級。

`[signal]` void QAbstractOAuth2:: authorizationCallbackReceived (const QVariantMap & data )

Signal emitted when the reply server receives the authorization callback from the server: data contains the values received from the server.

`[signal]` void QAbstractOAuth2:: error (const QString & error , const QString & errorDescription , const QUrl & uri )

Signal emitted when the server responds to the request with an error: error is the name of the error; errorDescription describes the error and uri is an optional URI containing more information about the error.

`[虛擬]` QAbstractOAuth2:: ~QAbstractOAuth2 ()

銷毀 QAbstractOAuth2 實例。

`[虛擬]` QUrl QAbstractOAuth2:: createAuthenticatedUrl (const QUrl & url , const QVariantMap & 參數 = QVariantMap())

The returned URL is based on url , combining it with the given 參數 and the access token.

注意： 此函數可以被援引，通過元對象係統和從 QML。見 Q_INVOKABLE .

`[override virtual]` QNetworkReply QAbstractOAuth2:: deleteResource (const QUrl & url* , const QVariantMap & 參數 = QVariantMap())

重實現： QAbstractOAuth::deleteResource (const QUrl &url, const QVariantMap ¶meters).

Sends an authenticated DELETE request and returns a new QNetworkReply 。 url and 參數 are used to create the request.

另請參閱 : Hypertext Transfer Protocol -- HTTP/1.1: DELETE

注意： 此函數可以被援引，通過元對象係統和從 QML。見 Q_INVOKABLE .

`[override virtual]` QNetworkReply QAbstractOAuth2:: get (const QUrl & url* , const QVariantMap & 參數 = QVariantMap())

重實現： QAbstractOAuth::get (const QUrl &url, const QVariantMap ¶meters).

Sends an authenticated GET request and returns a new QNetworkReply 。 url and 參數 are used to create the request.

另請參閱 : Hypertext Transfer Protocol -- HTTP/1.1: GET

注意： 此函數可以被援引，通過元對象係統和從 QML。見 Q_INVOKABLE .

`[override virtual]` QNetworkReply QAbstractOAuth2:: head (const QUrl & url* , const QVariantMap & 參數 = QVariantMap())

重實現： QAbstractOAuth::head (const QUrl &url, const QVariantMap ¶meters).

Sends an authenticated HEAD request and returns a new QNetworkReply 。 url and 參數 are used to create the request.

另請參閱 : Hypertext Transfer Protocol -- HTTP/1.1: HEAD

注意： 此函數可以被援引，通過元對象係統和從 QML。見 Q_INVOKABLE .

`[override virtual]` QNetworkReply QAbstractOAuth2:: post (const QUrl & url* , const QVariantMap & 參數 = QVariantMap())

重實現： QAbstractOAuth::post (const QUrl &url, const QVariantMap ¶meters).

Sends an authenticated POST request and returns a new QNetworkReply 。 url and 參數 are used to create the request.

另請參閱 : Hypertext Transfer Protocol -- HTTP/1.1: POST

注意： 此函數可以被援引，通過元對象係統和從 QML。見 Q_INVOKABLE .

`[虛擬]` QNetworkReply QAbstractOAuth2:: post (const QUrl & url* , const QByteArray & data )

這是重載函數。

Sends an authenticated POST request and returns a new QNetworkReply 。 url and data are used to create the request.

{Hypertext Transfer Protocol -- HTTP/1.1: POST}

注意： 此函數可以被援引，通過元對象係統和從 QML。見 Q_INVOKABLE .

該函數在 Qt 5.10 引入。

另請參閱 post () 和 https://tools.ietf.org/html/rfc2616#section-9.6 .

`[虛擬]` QNetworkReply QAbstractOAuth2:: post (const QUrl & url* , QHttpMultiPart * multiPart )

這是重載函數。

Sends an authenticated POST request and returns a new QNetworkReply 。 url and multiPart are used to create the request.

{Hypertext Transfer Protocol -- HTTP/1.1: POST}

注意： 此函數可以被援引，通過元對象係統和從 QML。見 Q_INVOKABLE .

該函數在 Qt 5.10 引入。

另請參閱 post (), QHttpMultiPart ，和 https://tools.ietf.org/html/rfc2616#section-9.6 .

`[override virtual]` QNetworkReply QAbstractOAuth2:: put (const QUrl & url* , const QVariantMap & 參數 = QVariantMap())

重實現： QAbstractOAuth::put (const QUrl &url, const QVariantMap ¶meters).

Sends an authenticated PUT request and returns a new QNetworkReply 。 url and 參數 are used to create the request.

另請參閱 : Hypertext Transfer Protocol -- HTTP/1.1: PUT

注意： 此函數可以被援引，通過元對象係統和從 QML。見 Q_INVOKABLE .

`[虛擬]` QNetworkReply QAbstractOAuth2:: put (const QUrl & url* , const QByteArray & data )

這是重載函數。

Sends an authenticated PUT request and returns a new QNetworkReply 。 url and data are used to create the request.

{Hypertext Transfer Protocol -- HTTP/1.1: PUT}

注意： 此函數可以被援引，通過元對象係統和從 QML。見 Q_INVOKABLE .

該函數在 Qt 5.10 引入。

另請參閱 put () 和 https://tools.ietf.org/html/rfc2616#section-9.6 .

`[虛擬]` QNetworkReply QAbstractOAuth2:: put (const QUrl & url* , QHttpMultiPart * multiPart )

這是重載函數。

Sends an authenticated PUT request and returns a new QNetworkReply 。 url and multiPart are used to create the request.

{Hypertext Transfer Protocol -- HTTP/1.1: PUT}

注意： 此函數可以被援引，通過元對象係統和從 QML。見 Q_INVOKABLE .

該函數在 Qt 5.10 引入。

另請參閱 put (), QHttpMultiPart ，和 https://tools.ietf.org/html/rfc2616#section-9.6 .

QString QAbstractOAuth2:: refreshToken () const

Gets the current refresh token.

Refresh tokens usually have longer lifespans than access tokens, so it makes sense to save them for later use.

Returns the current refresh token or an empty string, if there is no refresh token available.

注意： Getter function for property refreshToken.

另請參閱 setRefreshToken ().

QString QAbstractOAuth2:: responseType () const

返迴 response_type used.

void QAbstractOAuth2:: setRefreshToken (const QString & refreshToken )

Sets the new refresh token refreshToken to be used.

A custom refresh token can be used to refresh the access token via this method and then the access token can be refreshed via QOAuth2AuthorizationCodeFlow::refreshAccessToken ().

注意： setter 函數對於特性 refreshToken .

另請參閱 refreshToken ().

QAbstractOAuth2 Class

特性

公共函數

重實現公共函數

信號

詳細描述

特性文檔編製

clientIdentifierSharedKey : QString

expiration : const QDateTime

scope : QString

state : QString

userAgent : QString

成員函數文檔編製

QAbstractOAuth2:: QAbstractOAuth2 ( QNetworkAccessManager * manager , QObject * parent = nullptr)

QAbstractOAuth2:: QAbstractOAuth2 ( QObject * parent = nullptr)

[signal] void QAbstractOAuth2:: authorizationCallbackReceived (const QVariantMap & data )

[signal] void QAbstractOAuth2:: error (const QString & error , const QString & errorDescription , const QUrl & uri )

[虛擬] QAbstractOAuth2:: ~QAbstractOAuth2 ()

[虛擬] QUrl QAbstractOAuth2:: createAuthenticatedUrl (const QUrl & url , const QVariantMap & 參數 = QVariantMap())

[override virtual] QNetworkReply *QAbstractOAuth2:: deleteResource (const QUrl & url , const QVariantMap & 參數 = QVariantMap())

[override virtual] QNetworkReply *QAbstractOAuth2:: get (const QUrl & url , const QVariantMap & 參數 = QVariantMap())

[override virtual] QNetworkReply *QAbstractOAuth2:: head (const QUrl & url , const QVariantMap & 參數 = QVariantMap())

[override virtual] QNetworkReply *QAbstractOAuth2:: post (const QUrl & url , const QVariantMap & 參數 = QVariantMap())

[虛擬] QNetworkReply *QAbstractOAuth2:: post (const QUrl & url , const QByteArray & data )

[虛擬] QNetworkReply *QAbstractOAuth2:: post (const QUrl & url , QHttpMultiPart * multiPart )

[override virtual] QNetworkReply *QAbstractOAuth2:: put (const QUrl & url , const QVariantMap & 參數 = QVariantMap())

[虛擬] QNetworkReply *QAbstractOAuth2:: put (const QUrl & url , const QByteArray & data )

[虛擬] QNetworkReply *QAbstractOAuth2:: put (const QUrl & url , QHttpMultiPart * multiPart )

QString QAbstractOAuth2:: refreshToken () const

QString QAbstractOAuth2:: responseType () const

void QAbstractOAuth2:: setRefreshToken (const QString & refreshToken )

內容

`[signal]` void QAbstractOAuth2:: authorizationCallbackReceived (const QVariantMap & data )

`[signal]` void QAbstractOAuth2:: error (const QString & error , const QString & errorDescription , const QUrl & uri )

`[虛擬]` QAbstractOAuth2:: ~QAbstractOAuth2 ()

`[虛擬]` QUrl QAbstractOAuth2:: createAuthenticatedUrl (const QUrl & url , const QVariantMap & 參數 = QVariantMap())

`[override virtual]` QNetworkReply QAbstractOAuth2:: deleteResource (const QUrl & url* , const QVariantMap & 參數 = QVariantMap())

`[override virtual]` QNetworkReply QAbstractOAuth2:: get (const QUrl & url* , const QVariantMap & 參數 = QVariantMap())

`[override virtual]` QNetworkReply QAbstractOAuth2:: head (const QUrl & url* , const QVariantMap & 參數 = QVariantMap())

`[override virtual]` QNetworkReply QAbstractOAuth2:: post (const QUrl & url* , const QVariantMap & 參數 = QVariantMap())

`[虛擬]` QNetworkReply QAbstractOAuth2:: post (const QUrl & url* , const QByteArray & data )

`[虛擬]` QNetworkReply QAbstractOAuth2:: post (const QUrl & url* , QHttpMultiPart * multiPart )

`[override virtual]` QNetworkReply QAbstractOAuth2:: put (const QUrl & url* , const QVariantMap & 參數 = QVariantMap())

`[虛擬]` QNetworkReply QAbstractOAuth2:: put (const QUrl & url* , const QByteArray & data )

`[虛擬]` QNetworkReply QAbstractOAuth2:: put (const QUrl & url* , QHttpMultiPart * multiPart )