內容

公共類型
特性
公共函數
公共槽
信號
靜態公共成員
詳細描述

QGeoSatelliteInfoSource Class

The QGeoSatelliteInfoSource class is an abstract base class for the distribution of satellite information updates. 更多...

頭：	#include <QGeoSatelliteInfoSource>
qmake:	QT += positioning
Since:	Qt 5.2
繼承：	QObject

公共類型

enum	Error { AccessError, ClosedError, NoError, UnknownSourceError }

特性

minimumUpdateInterval : const int
updateInterval : int

1 特性繼承自 QObject

公共函數

	QGeoSatelliteInfoSource (QObject * parent )
virtual	~QGeoSatelliteInfoSource ()
virtual QGeoSatelliteInfoSource::Error	error () const = 0
virtual int	minimumUpdateInterval () const = 0
virtual void	setUpdateInterval (int msec )
QString	sourceName () const
int	updateInterval () const

31 公共函數繼承自 QObject

公共槽

virtual void	requestUpdate (int timeout = ...) = 0
virtual void	startUpdates () = 0
virtual void	stopUpdates () = 0

1 公共槽繼承自 QObject

信號

void	error (QGeoSatelliteInfoSource::Error satelliteError )
void	requestTimeout ()
void	satellitesInUseUpdated (const QList<QGeoSatelliteInfo> & satellites )
void	satellitesInViewUpdated (const QList<QGeoSatelliteInfo> & satellites )

2 信號繼承自 QObject

靜態公共成員

QStringList	availableSources ()
QGeoSatelliteInfoSource *	createDefaultSource (QObject * parent )
QGeoSatelliteInfoSource *	createSource (const QString & sourceName , QObject * parent )
const QMetaObject	staticMetaObject

9 靜態公共成員繼承自 QObject

額外繼承成員

9 保護函數繼承自 QObject

詳細描述

The QGeoSatelliteInfoSource class is an abstract base class for the distribution of satellite information updates.

The static function QGeoSatelliteInfoSource::createDefaultSource () creates a default satellite data source that is appropriate for the platform, if one is available. Otherwise, available QGeoPositionInfoSourceFactory plugins will be checked for one that has a satellite data source available.

調用 startUpdates () 和 stopUpdates () to start and stop regular updates, or requestUpdate () to request a single update. When an update is available, satellitesInViewUpdated () 和/或 satellitesInUseUpdated () 會被發射。

If regular satellite updates are required, setUpdateInterval () can be used to specify how often these updates should be emitted. If no interval is specified, updates are simply provided whenever they are available. For example:

// Emit updates every 10 seconds if available
QGeoSatelliteInfoSource *source = QGeoSatelliteInfoSource::createDefaultSource(0);
if (source)
    source->setUpdateInterval(10000);

To remove an update interval that was previously set, call setUpdateInterval () with a value of 0.

Note that the satellite source may have a minimum value requirement for update intervals, as returned by minimumUpdateInterval ().

成員類型文檔編製

enum QGeoSatelliteInfoSource:: Error

The Error enumeration represents the errors which can occur.

常量	值	描述
`QGeoSatelliteInfoSource::AccessError`	`0`	The connection setup to the satellite backend failed because the application lacked the required privileges.
`QGeoSatelliteInfoSource::ClosedError`	`1`	The satellite backend closed the connection, which happens for example in case the user is switching location services to off. This object becomes invalid and should be deleted. A new satellite source can be created by calling createDefaultSource () later on.
`QGeoSatelliteInfoSource::NoError`	`2`	沒有齣現錯誤。
`QGeoSatelliteInfoSource::UnknownSourceError`	`-1`	發生無法識彆的錯誤。

特性文檔編製

minimumUpdateInterval : const int

This property holds the minimum time (in milliseconds) required to retrieve a satellite update.

This is the minimum value accepted by setUpdateInterval () 和 requestUpdate ().

訪問函數：

virtual int

minimumUpdateInterval () const = 0

updateInterval : int

This property holds the requested interval in milliseconds between each update.

If the update interval is not set (or is set to 0) the source will provide updates as often as necessary.

If the update interval is set, the source will provide updates at an interval as close to the requested interval as possible. If the requested interval is less than the minimumUpdateInterval (), the minimum interval is used instead.

Changes to the update interval will happen as soon as is practical, however the time the change takes may vary between implementations. Whether or not the elapsed time from the previous interval is counted as part of the new interval is also implementation dependent.

The default value for this property is 0.

Note: Subclass implementations must call the base implementation of setUpdateInterval() so that updateInterval() returns the correct value.

訪問函數：

int	updateInterval () const
virtual void	setUpdateInterval (int msec )

成員函數文檔編製

QGeoSatelliteInfoSource:: QGeoSatelliteInfoSource ( QObject * parent )

Creates a satellite source with the specified parent .

`[虛擬]` QGeoSatelliteInfoSource:: ~QGeoSatelliteInfoSource ()

Destroys the satellite source.

`[static]` QStringList QGeoSatelliteInfoSource:: availableSources ()

Returns a list of available source plugins, including the default system backend if one is available.

`[static]` QGeoSatelliteInfoSource QGeoSatelliteInfoSource:: createDefaultSource ( QObject parent )

Creates and returns a source with the specified parent that reads from the system's default source of satellite update information, or the highest priority available plugin.

Returns 0 if the system has no default satellite source, no valid plugins could be found or the user does not have the permission to access the satellite data.

`[static]` QGeoSatelliteInfoSource QGeoSatelliteInfoSource:: createSource (const QString & sourceName* , QObject * parent )

Creates and returns a source with the given parent , by loading the plugin named sourceName .

Returns 0 if the plugin cannot be found.

`[pure virtual]` QGeoSatelliteInfoSource::Error QGeoSatelliteInfoSource:: error () const

返迴最後齣現的錯誤。

This signal is not emitted when a requestTimeout () has occurred.

`[signal]` void QGeoSatelliteInfoSource:: error ( QGeoSatelliteInfoSource::Error satelliteError )

此信號發射，在齣現錯誤後。 satelliteError 參數描述齣現錯誤的類型。

注意： 信號 error 在此類中被重載。通過使用函數指針句法連接到此信號，Qt 提供用於獲得如此範例展示的函數指針的方便幫助程序：

connect(geoSatelliteInfoSource, QOverload<QGeoSatelliteInfoSource::Error>::of(&QGeoSatelliteInfoSource::error),
    [=](QGeoSatelliteInfoSource::Error satelliteError){ /* ... */ });

`[signal]` void QGeoSatelliteInfoSource:: requestTimeout ()

Emitted if requestUpdate () was called and the current satellite information could not be retrieved within the specified timeout.

While the triggering of this signal may be considered an error condition, it does not imply the emission of the error() signal. Only the emission of requestTimeout() is required to indicate a timeout.

`[pure virtual slot]` void QGeoSatelliteInfoSource:: requestUpdate ( int timeout = ...)

Attempts to get the current satellite information and emit satellitesInViewUpdated () 和 satellitesInUseUpdated () with this information. If the current satellite information cannot be found within the given timeout (in milliseconds) or if timeout is less than the value returned by minimumUpdateInterval (), requestTimeout () 發射。

If the timeout is zero, the timeout defaults to a reasonable timeout period as appropriate for the source.

This does nothing if another update request is in progress. However it can be called even if startUpdates () has already been called and regular updates are in progress.

`[signal]` void QGeoSatelliteInfoSource:: satellitesInUseUpdated (const QList < QGeoSatelliteInfo > & satellites )

若 startUpdates () 或 requestUpdate () is called, this signal is emitted when an update is available on the number of satellites that are currently in use.

These are the satellites that are used to get a "fix" - that is, those used to determine the current position.

The satellites parameter holds the satellites currently in use.

`[signal]` void QGeoSatelliteInfoSource:: satellitesInViewUpdated (const QList < QGeoSatelliteInfo > & satellites )

若 startUpdates () 或 requestUpdate () is called, this signal is emitted when an update is available on the satellites that are currently in view.

The satellites parameter holds the satellites currently in view.

QString QGeoSatelliteInfoSource:: sourceName () const

Returns the unique name of the satellite source implementation in use.

This is the same name that can be passed to createSource () in order to create a new instance of a particular satellite source implementation.

`[pure virtual slot]` void QGeoSatelliteInfoSource:: startUpdates ()

Starts emitting updates at regular intervals. The updates will be provided whenever new satellite information becomes available.

If satellite information cannot be retrieved or some other form of timeout has occurred the satellitesInViewUpdated () 和 satellitesInUseUpdated () signals may be emitted with empty parameter lists.

另請參閱 satellitesInViewUpdated () 和 satellitesInUseUpdated ().

`[pure virtual slot]` void QGeoSatelliteInfoSource:: stopUpdates ()

Stops emitting updates at regular intervals.

內容

QGeoSatelliteInfoSource Class

公共類型

特性

公共函數

公共槽

信號

靜態公共成員

額外繼承成員

詳細描述

成員類型文檔編製

enum QGeoSatelliteInfoSource:: Error

特性文檔編製

minimumUpdateInterval : const int

updateInterval : int

成員函數文檔編製

QGeoSatelliteInfoSource:: QGeoSatelliteInfoSource ( QObject * parent )

[虛擬] QGeoSatelliteInfoSource:: ~QGeoSatelliteInfoSource ()

[static] QStringList QGeoSatelliteInfoSource:: availableSources ()

[static] QGeoSatelliteInfoSource *QGeoSatelliteInfoSource:: createDefaultSource ( QObject * parent )

[static] QGeoSatelliteInfoSource *QGeoSatelliteInfoSource:: createSource (const QString & sourceName , QObject * parent )

[pure virtual] QGeoSatelliteInfoSource::Error QGeoSatelliteInfoSource:: error () const

[signal] void QGeoSatelliteInfoSource:: error ( QGeoSatelliteInfoSource::Error satelliteError )

[signal] void QGeoSatelliteInfoSource:: requestTimeout ()

[pure virtual slot] void QGeoSatelliteInfoSource:: requestUpdate ( int timeout = ...)

[signal] void QGeoSatelliteInfoSource:: satellitesInUseUpdated (const QList < QGeoSatelliteInfo > & satellites )

[signal] void QGeoSatelliteInfoSource:: satellitesInViewUpdated (const QList < QGeoSatelliteInfo > & satellites )